Deep Clean & Shine Luxury Vinyl Floors

100% Money Back Guaranteed

Lamanator Plus™ was specifically designed to deep clean, restore, and shine Luxury Vinyl floors.  It eliminates streaking, hazing, & footprint tracking.  It will remove scuff marks, fill scratches, and put a beautiful, long lasting shine on your floor.

Floor Care Solutions

What is Lamanator Plus?

Lamanator Plus™ is a state of the art product line that will get and keep your flooring looking as good as new!  Even better!!  So easy and simple to use a ten year old kid can do it.

It also works great on Laminate, Vinyl Composition Tile (VCT), Hardwood, Vinyl, Formica, Bamboo, Cork, Linoleum, and Slate flooring.  It is 100% Biodegradable and contains no harmful chemicals or corrosives.

Our premium Luxury Vinyl floor cleaning & restoration products offer an easy-to-use, fool-proof process that can clean, restore, & shine your LVP floors to a beautiful finish that resembles a new floor, and in most cases, better than new!

What Does It Do For Your LVP Floors?

• Puts a beautiful showroom shine on old or dull LVP floors
• Helps protect the original Luxury Vinyl floor surface
• Fills and hides surface scratches on LVP
• Removes scuff marks
• Deep cleans flooring
• Gives your Luxury Vinyl flooring a brand new look
• Helps eliminate prints & tracking from bare feet and pets
• Does the same thing for laminate, tile, cork and bamboo floors
• Works wonders on hardwood flooring too. NO SANDING REQUIRED
• Will take the daily punishment instead of the Luxury Vinyl top coat
• Also works great on counter tops and cabinets

What Will It Remove From Your Floors?

• Waxes
• Factory Over-Spray
• Orange Glo
• Rejuvenate
• Quick Shine
• Mop & Glo
• Vinegar & Water
• Paint
• Wood Solv
• Bona 
• Wood Pecker's Smart Shine
• Floor Polish
• And almost any other product that shouldn't be put on the floor

Why Are Luxury Vinyl Floors So Difficult To Maintain?

The Problem: It starts with the Factory Over-Spray

To see how Lamanator Plus™ works, it is important to first understand why the LVP flooring that look so great when first installed starts to look so bad within 6 to 12 months.

When all engineered flooring, including LVP, LVT, laminate, bamboo, cork, and even some wood is manufactured, the edges of the individual boards are sprayed with either an oil or wax.  This is done to help seal the edges to help prevent moisture intrusion.  As the oil or wax is being sprayed, some of the mist from the spray lands on the top of the boards.  It is clear so you don’t see it.  After installation this "Over-Spray" will attract cooking oils in the air and other contaminates tracked into the house.  That will then cause the floor to start collecting dirt and other residue.  This factory "over-spray" cannot be removed by simple mopping even with a store bought floor cleaner.

You may wonder why the factory doesn’t remove this "over-spray".  It’s about money; It would require another production line and another step in the manufacturing process.  They also don’t see this as a big problem, shortsighted as that might be in our opinion.

Many people that have LVP type floors complain about footprints from bare or stocking feet.  Pets can also leave prints on the floor.  This is due to the factory over-spray residue attracting the oils off the bottom of feet or paws.  As the floor gets dirtier and dirtier it starts to show more footprints and paw prints and it becomes harder and harder to clean.

What usually happens then is you go down to your local hardware or flooring store and buy some type of Luxury Vinyl floor cleaner, like Bona, Mop and Glow, Fantastic, Orange Glo, etc... This just adds to the problem as those so called cleaning products do not take off the factory over-spray, but rather mix with it, making the problem worse.  They also do not adhere properly to the top coating of the floor.  Now your floor looks streaky, smudgy and dirty all the time.

The Solution: Lamanator Plus

It's A Simple 2 Step Process

To fix the problem it is vital that you first get all that residue off the Luxury Vinyl floor, including the factory over-spray.  Our Deep Scrub cleaner was designed to do just that, and there is no other product on the market that will remove that stubborn residue and not hurt the floor.  It doesn’t matter if the floor is brand new or ten years old, this process should be done.  Once done you will never have to do that process again (unless you put something else on the floor you shouldn’t have).  This process is easy to do; just follow the instructions thoroughly.

If your floor is older and worn, has scuff or scratch marks on it, or you want to increase the shine and add a layer of moisture protection on the floor, then the next step is to apply the Restorer product.  This will hide the scuff and scratch marks as well as add a great shine to the floor while protecting it from liquid spills.  If you have a matte finish and want to keep it that way then put only 1 coat of Restorer.  It is so simple and easy to do!

If your floor is new you may forgo the Restorer product if you wish.  This will still give your floor a thorough cleaning and rid the flooring of any over spray, waxes, or other residue and make the floor much easier to care for and maintain.

Once the cleaning with the Deep Scrub is done and the Restorer Finish is applied you can simply maintain the floor with our neutral Flooring Cleaner.  Why use our LVP Flooring Cleaner?  Because it will clean the floor and help maintain the shine, never streak and will not leave a residue.  Residue collects oils and dirt in the air, again making it hard to keep the LVP floor clean.  You should use this for your weekly or bi-weekly cleaning.  Between those floor cleanings you can use a damp mop with water only (do not use vinegar on Luxury Vinyl floors - as mentioned before).  We recommend a microfiber mop as it also picks up bacteria, cleans better, and is easily washed.  Do not add bleach or softener when washing microfiber in a washing machine.

Other Information

Our Restorer finish can easily be removed using the Deep Scrub cleaner.  You cannot make a mistake that cannot be easily fixed.  Actually, if you follow the instructions, you cannot make a mistake, as it really is a fool-proof process.

After applying the Restorer; if an area of the floor starts to wear faster than the rest of the floor, i.e., the entrance into the room that gets heavy traffic or if you simply want to touch up an area, you can easily just mop on the Restorer in that area and it will blend in great with the rest of the floor.  When the floor needs to be redone after a year or two you will not have to do the Deep Scrub cleaning again.  Simply mop the floor with the maintenance Flooring Cleaner and reapply the Restorer Finish.

What Floor Types Does Lamanator Plus™ Work On?

In addition to LVP floors, Lamanator Plus also works great on Laminate, Tile, Formica, Wood, Bamboo, Cork, and more.

Laminate	LVP & LVT	Real Wood
Bamboo	Cork	Formica

We recently received this picture from one of our return customers who decided to restore some tile flooring in his basement:

After one simple application of our products, he was thrilled with the results!

Our products provide a deep cleaning and high performance floor coating that will help seal your floor, give your floor a brand new look, help hide scratches and scuffs, protect the original surface, help to keep it clean and give your LVP floor a beautiful new shine. You'll be amazed with the incredible results you'll get from Lamanator Plus™.  These fantastic products are 100% Biodegradable and 100% Guaranteed.

If you've been thinking of replacing your weathered, old, scratched or scuffed flooring -- give us a try first!  Our products are easy to use and will clean, revitalize and restore your LVP floors.  In many cases our customers are delighted to find that their old floors look brand new again.  Before spending thousands of dollars and creating an overwhelming replacement project, try Lamanator Plus™!