Deep Clean & Shine Your Laminate Floors

Are your laminate floors dull, hazy or streaky, no matter how often you clean them? The problem may be stubborn residue left behind by everyday cleaners. Lamanator Plus removes that buildup, adds a beautiful, long-lasting shine, and makes your floors easier to maintain. Love the look of your floors again!

Frustrated With Your Floors?

How Lamanator Plus Works Differently?

Many conventional floor cleaners and polishes leave behind residue that builds up over time, making floors look worse instead of better.

Lamanator Plus™ takes a different approach. Our complete floor-care system removes stubborn buildup, adds a beautiful shine, and makes ongoing maintenance simple. Instead of covering up the problem, it helps address what's causing your floors to look dull and lifeless in the first place.

Designed for laminate flooring and luxury vinyl (LVP/LVT), Lamanator Plus also works on many other surfaces, including hardwood, VCT, vinyl, Formica, bamboo, cork, linoleum, and slate.

What Does It Do For Your Floors?

• Adds a showroom shine to old or dull floors
• Removes stubborn residue and buildup that cause streaking, cloudy haze, and dullness
• Makes everyday cleaning easier and helps prevent new buildup
• Helps conceal minor scratches and scuffs
• Helps seal joints against spills and moisture
• Helps reduce tracking from footprints and paw prints
• Protects the original surface by taking daily wear instead of your laminate's top coat
• Works on LVP, LVT, hardwood, tile, bamboo, and cork too, with no sanding required

What Will It Remove From Your Floors?

• Bona, Mop & Glo, Orange Glo, Rejuvenate, Quick Shine, and Wood Pecker's Smart Shine
• Floor polish and wax
• Vinegar and water residue
• Factory over-spray and installation glue
• Plus stubborn residue and buildup left behind by many other floor-care products

Why Are These Floors So Difficult To Maintain?

The Problem: It starts with the Factory Over-Spray

To see how Lamanator Plus™ works, it is important to first understand why the laminate & vinyl flooring that look so great when first installed starts to look so bad within 6 to 12 months.

When all engineered flooring, including laminate, vinyl plank, bamboo, cork, and even some wood is manufactured, the edges of the individual boards are sprayed with either an oil or wax.  This is done to help seal the edges to help prevent moisture intrusion.  As the oil or wax is being sprayed, some of the mist from the spray lands on the top of the boards.  It is clear so you don’t see it.  After installation this "Over-Spray" will attract cooking oils in the air and other contaminates tracked into the house.  That will then cause the floor to start collecting dirt and other residue.  This factory "over-spray" cannot be removed by simple mopping even with a store bought laminate floor cleaner.

You may wonder why the factory doesn’t remove this "over-spray".  It’s about money; It would require another production line and another step in the manufacturing process.  They also don’t see this as a big problem, shortsighted as that might be in our opinion.

Many people that have laminate type floors complain about footprints from bare or stocking feet.  Pets can also leave prints on the floor.  This is due to the factory over-spray residue attracting the oils off the bottom of feet or paws.  As the floor gets dirtier and dirtier it starts to show more footprints and paw prints and it becomes harder and harder to clean.

What usually happens then is you go down to your local hardware or flooring store and buy some type of laminate floor cleaner, like Bona, Mop and Glow, Fantastic, Orange Glo, etc... This just adds to the problem as those so called laminate cleaning products do not take off the factory over-spray, but rather mix with it, making the problem worse.  They also do not adhere properly to the aluminum oxide coating (the hard protective layer that is on top of the floor).  Now your laminate floor looks streaky, smudgy and dirty all the time.

The Solution: Lamanator Plus

It's A Simple 2 Step Process

To fix the problem it is vital that you first get all that residue off the floor, including the factory over-spray.  Our Deep Scrub cleaner was designed to do just that, and there is no other product on the market that will remove that stubborn residue and not hurt the floor.  It doesn’t matter if the floor is brand new or ten years old, this process should be done.  Once done you will never have to do that process again (unless you put something else on the floor you shouldn’t have).  This process is easy to do; just follow the instructions thoroughly.

If your floor is older and worn, has scuff or scratch marks on it, or you want to increase the shine and add a layer of moisture protection on the floor, then the next step is to apply the Restorer product.  This will hide the scuff and scratch marks as well as add a great shine to the floor while protecting it from liquid spills.  If you have a matte finish and want to keep it that way then put only 1 coat of Restorer.  It is so simple and easy to do!

If your laminate floor is new you may forgo the Restorer product if you wish.  This will still give your floor a thorough cleaning and rid the flooring of any over spray, waxes, or other residue and make the floor much easier to care for and maintain.

Once the cleaning with the Deep Scrub is done and the Restorer Finish is applied you can simply maintain the floor with our neutral Flooring Cleaner.  Why use our laminate Flooring Cleaner?  Because it will clean the floor and help maintain the shine, never streak and will not leave a residue.  Residue collects oils and dirt in the air, again making it hard to keep the laminate floor clean.  You should use this for your weekly or bi-weekly cleaning.  Between those floor cleanings you can use a damp mop with water only (do not use vinegar on laminate floors - as mentioned before).  We recommend a microfiber mop as it also picks up bacteria, cleans better, and is easily washed.  Do not add bleach or softener when washing microfiber in a washing machine.

Other Information

Our Restorer finish can easily be removed using the Deep Scrub cleaner.  You cannot make a mistake that cannot be easily fixed.  Actually, if you follow the instructions, you cannot make a mistake, as it really is a fool-proof process.

After applying the Restorer; if an area of the floor starts to wear faster than the rest of the floor, i.e., the entrance into the room that gets heavy traffic or if you simply want to touch up an area, you can easily just mop on the Restorer in that area and it will blend in great with the rest of the floor.  When the floor needs to be redone after a year or two you will not have to do the Deep Scrub cleaning again.  Simply mop the floor with the maintenance Flooring Cleaner and reapply the Restorer Finish.

What Floor Types Does Lamanator Plus™ Work On?

Laminate	Vinyl (LVP/LVT)	Real Wood
Bamboo	Cork	Formica

We recently received this picture from one of our return customers who decided to restore some tile flooring in his basement:

After one simple application of our products, he was thrilled with the results!

Our products provide a deep cleaning and high performance floor coating that will help seal your floor, give your floor a brand new look, help hide scratches and scuffs, protect the original surface, help to keep it clean and give your laminate floor a beautiful new shine. You'll be amazed with the incredible results you'll get from Lamanator Plus™.  These fantastic products are 100% Biodegradable and 100% Guaranteed.